Construction & Materials
Acreage Calculator
Acreage: it converts the area you enter into acres (and hectares, square feet and square metres) using fixed area ratios — 1 acre = 43,560 sq ft = 4,046.86 m². Worked through below with real figures, and the calculator repeats the working on your own inputs — free, on-device, instant.
Acreage Calculator turns your length and width into the area in acres, hectares and square feet using fixed area-unit ratios. The maths runs locally, so nothing you enter leaves the page.
Estimate only. Area and land results depend on the measurements you enter; for legal or official purposes rely on surveyed figures and local land records, and note that regional units can vary.
About this calculator
Acreage is easiest to get wrong in the setup, not the arithmetic. It converts the area you enter into acres (and hectares, square feet and square metres) using fixed area ratios — 1 acre = 43,560 sq ft = 4,046.86 m². It matters before you buy: a clean volume estimate plus a waste allowance beats a guess every time. The worked example on this page (A plot measuring 200 ft × 150 ft = 30,000 sq ft ÷ 43,560 = 0.689 acres (1 acre = 43,560 sq ft).) shows the full substitution; the calculator above runs the same working on your own numbers, in your browser, with nothing uploaded.
How to use
- Enter the plot length in feet.
- Enter the plot width in feet.
- Read the area shown in square feet.
- Tap Calculate to see acres and hectares as well.
Why use the Acreage Calculator
Instant
Every quantity is worked out on your device the moment you tap Calculate.
Private
The numbers you enter stay in your browser and are never uploaded or saved.
Free
No signup, no paywall, and no ads placed inside your results.
Works offline
Once the page has loaded it keeps working on a weak or dropped connection.
Mobile-first
Laid out for phones and tablets on site just as much as for desktops.
Conversion accuracy
Conversions use standard area ratios; local registry or regional units can differ, so confirm against official land records before relying on a figure.
Common uses
Use it when sizing a garden or lot
Use it when converting square feet to acres
Use it when reading a site plan
Use it when estimating usable area
Use it for property-tax area checks
Use it for real-estate listings
Technical notes
Acreage Calculator converts the area you enter into acres (and hectares, square feet and square metres) using fixed area ratios — 1 acre = 43,560 sq ft = 4,046.86 m².
Conversions use fixed area ratios; registry or regional units may differ, so verify against local land records.
Results are rounded for display; the underlying calculation keeps full precision.
Worked example
A plot measuring 200 ft × 150 ft = 30,000 sq ft ÷ 43,560 = 0.689 acres (1 acre = 43,560 sq ft).
FAQ
Are the acres based on square feet?
Yes. The tool multiplies length by width to get square feet, then divides by 43,560 square feet, which is one acre.
Does the Acreage Calculator send my numbers to a server?
No. The Acreage Calculator runs entirely in your browser, so the values you enter never leave your device.
What units should I enter?
Enter both the length and the width in feet; the result is given in square feet, acres, and hectares.
Does it work for non-rectangular plots?
It assumes a rectangle; for an irregular plot, split it into rectangles and add the areas together.